The high solubility and low volatility of methyl-tertiary butyl ether (MTBE) makes it difficult to treat when present at low levels (as in most groundwater supplies) using established technologies such as air stripping and activated carbon. Unlike the established transfer technologies (e.g., air stripping, activated carbon adsorption), advanced oxidation by ultraviolet (UV) light could potentially destroys MTBE and its by-products. As part of this study, extensive pilot and bench scale evaluation was performed to understand the effectiveness of MTBE and its by-products [e.g., tertiary butyl alcohol (TBA) and tertiary butyl formate (TBF)] removal using UV/peroxide in ground and surface waters. The water quality matrix evaluated the impact of MTBE oxidation in the presence of other UV light absorbing compounds (e.g., nitrate) and radical scavengers (e.g., organics). These UV oxidation tests were conducted using both the medium-pressure (MP-UV) and low-pressure, high-output (LP-UV) lamps. Water quality impacts were also summarized using the energy requirement calculations. Based on the information gleaned from pilot testing, authors developed conceptual-level design and operational criteria. Conceptual-level capital and operational costs for full-scale systems were developed and presented.

You do not currently have access to this content.