Microfiltration was evaluated as a water treatment process using the 60 gpm (3.8 L/s) Memtec pilot plant in Manitowoc, WI, USA. The pilot plant operated for over six months. Productivity as measured by mass transfer coefficient (MTC) decline and water quality, as measured by turbidity, particles and coliform rejection were evaluated for microfiltration with no pretreatment, microfiltration with alum addition and microfiltration with PAC addition in the pilot plant study. The effects of temperature on microfilter fouling were evaluated by model development and data collection. Alum addition relative to PAC addition or conventional pretreatment increased the run-time from 10 days to 30 days at 50 gfd (85 L/hm2) and 25°C. Turbidity, particle and coliform rejection was independent of pretreatment. Run-time between chemical cleanings increased with decreasing flux and increasing temperature. Log rejection of turbidity and particles increased with increasing concentration. Infinite log rejection of coliforms was observed for a 1–2 log feed stream concentration.
Microfiltration productivity and water quality in relation to pretreatment, temperature and flux
J. S. Taylor, C. Robert, W. A. Lovins, S. Chen, K. Kopp, N. Kothari; Microfiltration productivity and water quality in relation to pretreatment, temperature and flux. Journal of Water Supply: Research and Technology-Aqua 1 September 1999; 48 (5): 191–200. doi: https://doi.org/10.2166/aqua.1999.0021
Download citation file: