In order to simulate surface runoff and flooding, one-dimensional (1D) overland flow networks can be automatically delineated using digital elevation models (DEM). The resulting network comprises flow paths and terrain depressions/ponds and is essential to reliably model pluvial (surface) flooding events in urban areas by so-called 1D/1D models. Conventional automatic DEM-based flow path delineation methods have problems in producing realistic overland flow paths when detailed high-resolution DEMs of urban areas are used. The aim of this paper is to present the results of research and development of three enhanced DEM-based overland flow path delineation methods; these methods are triggered when the conventional flow path delineation process stops due to a flow obstacle. Two of the methods, the ‘bouncing ball and buildings’ and ‘bouncing ball and A*’ methods, are based on the conventional ‘bouncing ball’ concept; the third proposed method, the ‘sliding ball’ method, is based on the physical water accumulation concept. These enhanced methods were tested and their results were compared with results obtained using two conventional flow path delineation methods using a semi-synthetic test DEM. The results showed significant improvements in terms of the reliability of the delineated overland flow paths when using these enhanced methods.
Enhanced DEM-based flow path delineation methods for urban flood modelling
J. P. Leitão, D. Prodanović, S. Boonya-aroonnet, Č. Maksimović; Enhanced DEM-based flow path delineation methods for urban flood modelling. Journal of Hydroinformatics 1 April 2013; 15 (2): 568–579. doi: https://doi.org/10.2166/hydro.2012.275
Download citation file: