This paper introduces a graphical user interface (GUI) for the R software that allows the rainfall-runoff relationship to be calculated, using the Curve Number method. This GUI is a raster-tool whose outputs are runoff estimates calculated using land use/land cover and hydrologic soil group maps. The package allows the user to select among three different antecedent moisture conditions and includes modifications about the initial abstraction parameter. We tested this GUI with data derived from two watersheds in Mexico and the outputs were compared with those produced using a well-established GIS tool in a vector environment. The results produced by these two approaches were practically the same. The main advantages of our package are: (1) ‘Sara4r’ is faster than previous vector based tools; (2) it is easy to use, even for people with no previous experience using R; (3) the modular design allows the integration of new routines and, (4) it is free and open source.
An easy-to-use R-based Graphical User Interface to conduct surface runoff estimation was developed.
Outputs from the newly NRCS-CN based tool are practically the same as a well-established GIS tool in a vector environment.
Being a free and open source software, it will allow us to incorporate new routines and evolve into a more robust tool.
Sara4r package offers more calculation speed.
Hydrologic modeling is one of the most important fields of research within environment-related disciplines. An accurate estimation of runoff caused by rainfall is required for a comprehensive management of water resources and the analysis of possible environmental impacts and water management strategies (Chen et al. 2017; Fernández-Pato et al. 2018; Abuzied & Mansour 2019; Jiang et al. 2019). The understanding of the relationship between both variables is important to anticipate the potential effects of floods during extreme climate events (Verma et al. 2018; Beg et al. 2019). It is also useful to estimate the amount of available water for irrigation in agriculture (Essaid & Caldwell 2017), or the potential for energy generation in hydroelectric plants (Reichl & Hack 2017). Moreover, it helps the design of hydraulic infrastructure and the evaluation of watershed management practices (Verma et al. 2017). Finally, surface runoff plays an important role in biogeochemical cycles.
Several models have been developed to generalize hydrologic processes such as the estimation of direct surface runoff from rainfall data (Chen et al. 2017). Among them, the empiric method of the Natural Resources Conservation Service (NRCS) curve number (CN), which relates land use and land cover (LULC), antecedent runoff condition and hydrologic soil groups (HSG), among other parameters (USDA 1986), has gained wide acceptance in engineering practice. This is a simplified method, used at watershed level, to estimate direct runoff caused by a rainfall event (Hawkins et al. 2019), using measurable characteristics of the basin such as slope, soil types, and land cover and land uses.
Since its creation, this method has been rapidly adopted in many regions around the world regardless of land uses or climatic conditions (Soulis & Valiantzas 2012; Verma et al. 2017). The main reason behind its wide use is that it is easy to apply due to the fact that the main input characteristics are defined in terms of land use and soil type (Hernández-Guzmán & Ruiz-Luna 2013; Walega et al. 2020). Regarding this, Ponce & Hawkins (1996) have discussed the pros and cons of using it, while Verma et al. (2017) and Hawkins et al. (2019) present a critical review of the NRCS-CN concept and associated models, their advantages and limitations.
Despite its widespread use, there is no general agreement regarding the methodology to estimate the CN parameter values from measured rainfall-runoff data (Soulis & Valiantzas 2012). Many alternatives have been explored to include different Antecedent Moisture Conditions (AMC) and initial abstraction (Ia) values. There are three AMC conditions for dry (AMC I), average (AMC II) and saturated soils (AMC III), that are assigned as a function of the five-day antecedent rainfall. There are two accepted values of Ia (the initial fraction of the storm depth after which runoff begins) (Hernández-Guzmán & Ruiz-Luna 2013).
Recent contributions on the topic include remote sensing (RS) and geographic information system (GIS) techniques which allow the development of continuous hydrological simulation models (see Verma et al. 2017, for a complete list of software). Following this approach, Hernández-Guzmán et al. (2011) developed CN-Idris, a raster-based tool incorporating the NRCS-CN method as a module for Idrisi software. A subsequent tool named SARA (Spatial Analysis of surface Runoff in ArcGIS), was developed as a vector-based tool (Hernández-Guzmán & Ruiz-Luna 2013).
In recent years the use of the freely available R software (https://www.r-project.org/) has gained great popularity among ecologists and environmental scientists, as a tool to accomplish different analytical tasks in an integrated way. In particular, the R software is increasingly used for the analysis, modeling and visualization of spatial data (Hesselbarth et al. 2019), capacities that can be improved with the installation of many freely available routines (libraries).
Given the above considerations, the aim of this paper is to introduce the R package ‘Sara4r’, a graphical user interface (GUI) to conduct runoff estimation based on the NRCS-CN method, in a similar way to that used by modules developed for Idrisi and ArcGIS software (Hernández-Guzmán et al. 2011; Hernández-Guzmán & Ruiz-Luna 2013). This paper includes a general description of the NRCS-CN method, suitable as a manual for new users, inclusive for those with little or no experience at all using R (Appendix A1).
The ‘Sara4r’ package enables the calculation of surface runoff in watersheds with different conditions, as is exemplified using two case studies. The first case is for the San Nicolás – Cuitzmala watershed, an exorheic basin draining to the Pacific Ocean, mostly covered by dry and evergreen forests, with less than 1% of the area corresponding to human settlements. The second case is the endorheic Lake Cuitzeo watershed, a highly modified watershed in central Mexico. These watersheds were selected due to their biological and economic importance, respectively. On the one hand, the San Nicolás – Cuitzmala watershed is home to many endangered and threatened species. On the other hand, the lake Cuitzeo watershed holds the second largest lake in Mexico.
The NRCS-CN method is described in detail in the National Engineering Handbook Section 4: Hydrology (NEH-4) from the United States Department of Agriculture (USDA 1986). Thus, we only briefly describe the model used to develop our interface.
The NRCS-CN method
The CN is dimensionless and has a range between 0 and 100. These conditions represent the extremes between total infiltration (runoff = 0) and totally saturated watersheds (rainfall = runoff) (USDA 1986).
To estimate CN values, the NRCS provides runoff curve number tables for different cover types, hydrologic conditions and hydrologic soil groups (HSG). The HSG is a standard soil classification (A, B, C, D) that depends on soil texture and infiltration rates. The A group includes well-drained soils with a high rate of infiltration, whereas D soils are poorly drained with a permanently high water table (USDA 1986).
Antecedent moisture condition (AMC)
As mentioned above, there are three AMC, with seasonal limits based on the five-day antecedent rainfall. In the growing season, it is less than 35.6 mm, from 35.6 to 53.3 mm, and more than 53.3 mm for the lowest runoff potential (AMC I), the average condition (AMC II) and the highest runoff potential (AMC III), respectively. Whereas for the dormant season, their values are less than 12.7 mm, from 12.7 to 27.9 mm and more than 27.9 mm for AMC I, II, and III (Feyereisen et al. 2008). These options are included in the ‘Sara4r’ package, with the AMC II as default, and AMC I and III as optional depending on the user's knowledge about the soil conditions, considering that runoff estimates could vary depending on the AMC selected (Hernández-Guzmán & Ruiz-Luna 2013).
Modified SCS-CN method (Ia/S = 0.05)
Implementation of the ‘Sara4r’ package
All the above equations are included in the ‘Sara4r’ package, whose Graphical User Interface (GUI; Figure 1) was codified using the RGTk2 package for R (Lawrence & Lang 2019). Taking into account that much of the spatial analysis used inside this package comprises map algebra functions (i.e. raster display, overlay, reclassify), ‘Sara4r’ has a dependency on the well-established ‘raster’ R package (Hijmans et al. 2020).
The basic raster layers to be input (LULC and hydrologic soils groups (HSG) maps) require geographical and geometric compatibility. Each LULC category must be codified using multiples of ten (e.g. agriculture = 10, forest = 20, bare soils = 30, etc.), while the HSGs are codified numerically (A = 1, B = 2, C = 3, D = 4). Then, the overlay of both layers produces all the possible combinations which are then stored in a new layer called ‘Landsoil’.
A comma delimited file (*.csv) should be created previously with all the possible combinations in the Landsoil file, together with the CN values in the TR-55 handbook (USDA 1986). Once this information is uploaded, together with rainfall data values (inches) and pixel size (meters), CN values are assigned to every pixel in the map through a reclassification process.
The potential water retention after runoff begins (S) and the initial abstraction (Ia) parameters are estimated in the background. If precipitation value (P) is less than or equal to Ia, then Q depth (in) is codified as zero. Finally, when the pixel size (m) is specified, Qvol (m3) is estimated. All outputs are stored in the working directory selected for the analysis, as text files in GeoTIFF format that can easily be imported into any GIS software for further analysis.
The ‘Sara4r’ package is designed to output CN maps, Q depth and runoff volume, and CN and runoff volume based in a series of selectable options accessed using pull-down menus for the initial abstraction (Ia) and the AMC (Fig. S1).
Considering the two case studies, 30 m-resolution LULC maps were derived from the classification of Landsat images obtained from the USGS Global Visualization Viewer (https://glovis.usgs.gov/). The study areas were delineated based on the watershed limits and classified using the combined iterative minimum distance and hill climbing variants, implemented into the K-means unsupervised algorithm in SAGA GIS v7.5 (Conrad et al. 2015). The classification scheme covered the following LULC classes codified by tens: water bodies, mangrove, evergreen forest, tropical dry forest, secondary succession, crops, grasslands, littoral, and human settlements.
Soil types were defined based on the Soil vector data set scale 1: 250,000 series II (National Continuous) from the National Institute of Statistics and Geography (INEGI by its name in Spanish: Instituto Nacional de Estadística y Geografía). The polygons were classified according to the criteria of the World Reference Base for Soil Resources (WRB) (FAO 2014) and subsequently reclassified into four hydrological soil groups (HSG) using the curve number method (USDA 1986).
Rainfall data recorded on a daily basis were retrieved from meteorological stations of the Mexican National Meteorological Service (SMN), distributed in or close to the watersheds under study. The observation period is 1935–2018 with a recorded length mean equal to 30 years. As a preliminary data filter, all precipitation events ≤1.0 inch were removed from the databases. The number of storm events from 1980 to 2017 ranged between 108 and 246 (mean 162 events by station). A rainfall value was calculated for each watershed based on the arithmetic mean of all the stations they included.
Regarding the number of meteorological stations in Lake Cuitzeo watershed and to provide a reliably spatial representation of precipitation variation in there, we interpolated the precipitation data recorded by each station, using the inverse distance weighting (IDW) algorithm. A mean areal rainfall value was then obtained from the interpolated rainfall map.
Finally, to provide a performance measure we used these inputs to make surface runoff evaluations. We used ordered rainfall data and runoff values were compared with those obtained with a well-established GIS tool (SARA v1.0) using the same data but in a vector environment. To minimize the biasing effect of small storms, only larger storms were used (P ≥ 25.4 mm).
Case study 1. San Nicolás – Cuitzmala watershed
The San Nicolás – Cuitzmala watershed, with a total area of about 3,900 km2, is located between 19°19′ and 20°15′ N and 105°17′ and 104°30′ W, in west-central Mexico (Figure 2). It is an exorheic watershed draining to the Pacific Ocean, characterized by a tropical sub-humid climate, with a clearly defined dry season (November to May) and also a rainy season (87% falling between June to October). The precipitation varies from 800 mm in the coastal area to 1,500 mm in the upper parts of the basin. The mean annual temperature is 25.6 °C (Flores-Díaz et al. 2018; Lazos-Chavero et al. 2018).
This region is biologically important due the heterogeneity of the landscape that promotes high alpha and beta species diversity and high levels of endemism (Suazo-Ortuño et al. 2018). However, the conversion of natural cover into agricultural land has been recurrent, as evidenced by previous studies (Flores-Casas & Ortega-Huerta 2019; Hernández-Guzmán et al. 2019).
In general, this watershed is characterized by the presence in the upper part of evergreen forests covering about 18.3% of the total area, and dry forest (32.7%) distributed at the lower part of the watershed. Secondary succession (27.5%) and induced grassland (19.2%) are the main covers derived from anthropogenic activities. Regarding the soil characteristics, about 75% of the watershed is represented by the hydrologic soil group B, while 86% of the area acquired CN values between 50 and 75.
Given these considerations, ‘Sara4r’ package was tested in this watershed using the antecedent moisture condition II and a precipitation value of 2 inches. The runoff estimate in the study area is about 17.75 × 106 m3 from a unique storm event. Using the SARA v1.0 tool, outputs (17.74 × 106 m3) are practically the same (differences <1%).
Case study 2. Lake Cuitzeo watershed
The Lake Cuitzeo watershed is an endorheic watershed of about 4,025 km2 located in the trans Mexican Volcanic Belt in the states of Michoacán and Guanajuato, between the coordinates 19°24′ and 20°07′ N, and 100°37′ and 101°34′ W. Drainage concentrates in the lower part of the watershed, forming Lake Cuitzeo that covers an area of about 300 km2 (Figure 3). It is the second largest lake in the country and classified as the most important lake area in the state of Michoacán (Mendoza et al. 2011). The climate is temperate with summer rains; the mean annual temperatures oscillate between 14 and 18 °C and the mean annual precipitation is about 800 mm (Correa-Ayram et al. 2014).
This watershed has intensive management, with agriculture and induced grassland occupying almost 50% of the study area, mainly distributed in the lower parts of the watershed. The evergreen forest is the most important natural cover (20.2%) and is distributed in the upper part of the watershed, mainly to the south and southeastern watershed. Also, secondary succession from dry forest clear-cutting is important, covering almost 17.5% of the watershed area. The hydrologic soil groups C and D occupied about 42 and 40%, respectively, while most of the watershed has a high runoff potential, with CN values oscillating between 60 and 98. Considering the AMC II and 1.4 inches as the precipitation value for a storm event, the runoff estimated in the study area is about 41.24 × 106 m3 which, compared with those obtained using the SARA v1.0 tool (41.23 × 106 m3), are practically the same (again, with differences <1%). The mean areal rainfall obtained through the interpolation using the IDW algorithm was 1.41 inches (±0.039) and produced a surface runoff volume of 41.78 × 106 m3. This is almost the same as a single storm value. These values depict the homogeneous distribution of the precipitation along the watershed.
Regarding the performance measures, these are presented in Figure 4. The modeled sub-watershed has an area = 185 km2, lower than 250 km2, the recommended catchment size to use the NRCS-CN method. Figure 4(a) shows the relationship between simulated precipitation values and surface runoff, while the differences between the estimated surface runoff using sara4r and SARA v1.0 are presented in Figure 4(b). For all simulated cases, the runoff volumes are practically the same (<1%). After 41 runs, our package takes less than 10 seconds each (mean = 5 s) to perform the same as SARA v1.0 (mean = 87 s).
The NRCS-CN method was originally released in 1986 and since then, it has been widely applied for the estimation of surface runoff resulting from storm events occurring in small watersheds. Because of the simple structure and clearly stated assumptions, it soon became one of the most popular techniques among the engineers and the practitioners who adopted it for its use in a variety of regions, land uses and climate conditions (Chen et al. 2017). However, Ponce & Hawkins (1996) suggested that this model should be used cautiously in watersheds larger than 250 km2 due to the risk of producing biased runoff estimations. Nevertheless, with some adaptations, the method was found suitable for the study of small- to large-scale watersheds, with areas ranging from 0.33 to 10,336 km2 (D'Asaro & Grillone 2012; Lian et al. 2020). The watershed analyzed in this study falls within this scale range (∼4,000 km2). According to Lian et al. (2020), the main limitation of their study was the ignorance of the antecedent moisture condition. To overcome this limitation, our package includes options to made runoff estimations considering the three AMC as well as a modified runoff equation that incorporates the initial abstraction ratio λ = Ia/S = 0.05. This value of λ = 0.05 is recommended for agency use (Hawkins et al. 2010).
Regarding the utilization of the NRCS-CN method, Verma et al. (2017) reviewed the methodology and provided an updated list of modified CN-based hydrological models. Hawkins et al. (2019) list some of the more useful continuous watershed models based on curve number hydrology (e.g., SWAT, AnnAGNPS, APEX, among others). Many of them are open source software, but they require programming experience otherwise the possibility to modify or adapt the NRCS-CN method is very limited. Stanić et al. (2018) recently included the NRCS-CN method into the 3DNet platform to initially estimate the surface runoff for hydrological modeling. However, they argued that the structure of the 3DNet is pre-set and, differently from other GIS software, cannot be altered by the user. Although 3DNet is a novel distributed hydrologic model developed for continuous hydrologic simulations, its limitations with regard to making modifications to the CN method are overcome with our package.
In the past, similar tools that integrate the NRCS-CN method were developed for GIS platforms. These tools include ArcCN-Runoff (Zhan & Huang 2004), NRCS GeoHydro (Merkel et al. 2008), CN-Idris (Hernández-Guzmán et al. 2011), and SARA v1.0 (Hernández-Guzmán & Ruiz-Luna 2013). However, these tools were developed to be used with commercial software, requiring a license for their use. Moreover, the programming language used in earlier projects (Visual Basic 6.0) has become obsolete. The ‘Sara4r’ package, the same as previous developments by the authors of this article, aimed to use the NRCS-CN method to assess runoff at the watershed level, using different AMC and initial abstraction configurations, making possible the adaptation to different land use and climate conditions. In addition, it offers more calculation speed, can be upgraded based on other routines available on the cloud (e.g. parallel computing) and does not require a commercial software license.
Recently, two groups of researchers developed a global HSG (Ross et al. 2018) and CN maps for hydrologic modeling (Jaafar et al. 2019) at 250 m spatial resolution. The latter include the R script used for generating the datasets. Since our newly developed interface works in a raster-based environment within the R software, it will allow the easy inclusion of these datasets. Regarding this, one option to assign CN values is using a comma-delimited file (*.csv); thus, users can select their own CN values rather than constraining them to use those in the handbook tables (USDA 1986).
Finally, the philosophy behind ‘Sara4r’ is to provide an open-source software for surface runoff estimation. Its convenience lies in the fact that the original code of the GUI is free and easily accessible, and may be modified as needed.
FUTURE RESEARCH AND OPPORTUNITIES
The interface was developed in a raster-based environment, allowing the inclusion of LULC data, fundamental to define runoff rates. The use of raster images allows the calculation of a unique runoff value by pixel, making this process faster than that produced using vector data. However, in addition to the LULC and soil characteristics, we consider that many other physical aspects from watersheds need to be included, to ensure a best analysis. Considering this, it would be important that future improvements of our package include: (1) correction of effects derived from physiographic characteristics (e.g. slope); (2) inclusion of the effects of spatial and temporal variability in rainfall over large areas; (3) soil moisture conditions (i.e. modifications to AMC conditions reported in the literature); (4) variations in the λ parameter value and (5) use of long-term climate data for a comprehensive hydrologic impact analysis.
The cases examined in this study demonstrated the applicability of the ‘Sara4r’ package to analyze the surface runoff in medium size watersheds for a storm value, but open the necessity to develop routines to include a spatially interpolated precipitation map as input to improve the model performance. Their integration into the R software increases the opportunities for the ‘Sara4r’ package to be used on a wide variety of platforms in which R and ‘RGtk2′ can be installed. The availability of the ‘Sara4r’ package in the Comprehensive R Archive Network (CRAN) repository facilitates its use and testing by those interested in hydrological analyses at the watershed level, promoting the possibility of evolving to a better and more robust tool, throughout further communications among user and developers, to fix bugs or to add potential improvements. This is very important, considering that previous experience on R is not necessary, and only requires feedback from users, in both directions, regarding the runoff assessment outputs and the performance of the package.
We thank three anonymous reviewers for helpful comments on an earlier version of the manuscript. This work was supported by the project Catedras – Mexican National Council for Science and Technology (CONACYT; Project No. 148). Landsat imagery was obtained from the United States Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. Author contributions: R.H. and A.R. designed the research; R.H. developed the software; R.H. and A.R. analyzed the data; R.H., A.R. and E.M. wrote the paper.
Description: Package sara4r
Developer: Rafael Hernández-Guzmán
Year first available: 2020
Hardware Requirement: General-purpose computer.
Software Requirement: Tested in R version 3.4 and later.
Availability and cost: This software is freely available.
Programming Language: R.
Program size: 2.84 MB
This software is freely available under the terms and conditions of the GNU General Public License.
DATA AVAILABILITY STATEMENT
All relevant data are included in the paper or its Supplementary Information.