Skip to Main Content
Table 2

The influence of C0 on the value of Q(CH-10)/Q(H-103)

C0 (mg/L)Solution volume (mL)Resin dosage (g)Qe (mg/g)
Q(CH-10)/Q(H-103)
CH-10H-103
100 200 0.02 395.0 ± 10.5 282.8 ± 7.6 1.40 
220 200 0.02 529.9 ± 11.2 422.5 ± 10.7 1.25 
500 100 0.05 583.7 ± 7.8 510.5 ± 9.6 1.14 
1,000 100 0.10 633.2 ± 12.3 578.5 ± 13.4 1.09 
C0 (mg/L)Solution volume (mL)Resin dosage (g)Qe (mg/g)
Q(CH-10)/Q(H-103)
CH-10H-103
100 200 0.02 395.0 ± 10.5 282.8 ± 7.6 1.40 
220 200 0.02 529.9 ± 11.2 422.5 ± 10.7 1.25 
500 100 0.05 583.7 ± 7.8 510.5 ± 9.6 1.14 
1,000 100 0.10 633.2 ± 12.3 578.5 ± 13.4 1.09 

Note: The adsorption tests were carried out at 303 K for 24 h. Q(CH-10) and Q(H-103) was the adsorption capacity of nitrobenzene onto CH-10 and H-103 at the adsorption equilibrium state, respectively.

Close Modal

or Create an Account

Close Modal
Close Modal