Radon is one of the contaminants that sometimes impair the water quality of wells, especially those drilled in bedrock. Domestic radon removal units based on aeration have been commercially available for more than ten years. In order to determine how effectively these units remove radon a new test protocol applying frequent sampling while letting 100 litres of water flow, was developed. This way, removal efficiencies can be more accurately calculated and possible malfunctions detected. Seven models of domestic aerators designed for removing radon from household water were tested. The aerators were based on diffused bubble aeration, spray aeration or jet aeration. The average removal efficiencies for 100 litres with a medium flow rate were 86–100% except for a unit that circulated the aerated water back to the well that had removal efficiency of 80% at the maximum. By conducting a questionnaire study usual problems related to the aeration units were localized and recommendations on maintenance and installation are given accordingly.
Skip Nav Destination
Research Article| October 01 2009
Radon removal by aeration: observations on testing, installation and maintenance of domestic treatment units
Water Supply (2009) 9 (4): 469–475.
T. Turtiainen; Radon removal by aeration: observations on testing, installation and maintenance of domestic treatment units. Water Supply 1 October 2009; 9 (4): 469–475. doi: https://doi.org/10.2166/ws.2009.449
Download citation file: