A kinetic model for DAF is presented. The author's kinetic model consists of the equations for describing a process of bubble-floc collision and attachment in a mixing zone, and a rise velocity of bubble-floc agglomerates in a flotation tank. The attachment process is formulated on a population balance model with bubbles and flocs as a flocculation in a turbulent flow. The rise velocity of bubble-floc agglomerates is formulated with size of flocs and composition of flocs including the floc density function and attached bubble number. The experimental verification was carried out, using a batch flotation tested and a mini-plant with synthetic clay suspension and colored water. The results successfully verify the validity of the model. From a given condition such as floc size and attached bubble number, the rate and extent of removal by DAF can be readily assessed by the model. A single-collector collision model, often discussed in some occasions, seems to be not useful to describe the DAF process.
Skip Nav Destination
Research Article| February 01 1995
A kinetic model for dissolved air flotation in water and wastewater treatment
Water Sci Technol (1995) 31 (3-4): 37–47.
K. Fukushi, N. Tambo, Y. Matsui; A kinetic model for dissolved air flotation in water and wastewater treatment. Water Sci Technol 1 February 1995; 31 (3-4): 37–47. doi: https://doi.org/10.2166/wst.1995.0514
Download citation file: