This paper concerns the imaging of hydrous floc particles by Light Microscopy (LM), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). The use of a microscope technique means that visual structural information is obtained, in contrast with other techniques measuring particle characteristics. It was found that when a preparation technique was used that involves cryogenic freezing of the sample, before observation in the SEM, larger (1-100 μm) floc particles could be imaged without the loss of structural information normally caused by drying the sample. Damage caused by drying was not apparent with the TEM technique used. It was shown that the various microscope techniques produced compatible results, together covering a wide size range (10 nm-5mm). This indicates that major artefact formation due to sample preparation is unlikely. It was furthermore shown that when a micro-scale continuous flow system was used the reproducibility of the floc structure observed increased.

This content is only available as a PDF.
You do not currently have access to this content.