The paper presents the development of the field of urban drainage modelling known as dual drainage - an approach to rainfaill runoff simulation in which the numerical model takes into account not only the flow through the sewer system, but also the flow on the surface. The steps in model development are described, and necessary data, assumptions used and operations to be performed using GIS are discussed. The numerical model simultaneously handles the full dynamic equations of flow through the sewer system and simplified equations of the surface flow. The surface excess water (due to the limited capacity of inlets or to the hydraulic head in the sewer system reaching the ground level) is routed to the neighbour subcatchment (not necessarily the one attached to the downstream network node), using surface retentions, if any.
Research Article|May 01 1999
An approach to simulation of dual drainage
Water Sci Technol (1999) 39 (9): 95-103.
S. Djordjević, D. Prodanović, Č. Maksimović; An approach to simulation of dual drainage. Water Sci Technol 1 May 1999; 39 (9): 95–103. doi: https://doi.org/10.2166/wst.1999.0451
Download citation file: