Application of the precipitation process using Fe and Al salts or lime, which is the main process used in Germany for phosphorus removal may lead to problems, such as an increase of the anion concentration of the water and recovering the phosphorus from the precipitation sludge. Therefore two processes for phosphorus removal from waste waters were developed which avoid these disadvantages:

  1. A process especially suitable for low phosphorus concentrations (≤1 mg/L P) employing Activated Alumina for the removal of the phosphate by adsorption.

  2. Phosphorus removal by means of direct precipitation of calcium phosphate induced by calcite as seeding material for the treatment of higher concentrated waters (≥20 mg/L P).

You do not currently have access to this content.