The biodegradation of toluene and benzene in a biofilter using cylindrical activated carbon as the filler materials was studied. Three gas flow rates, i.e. 0.25, 0.50 and 0.75 m3/h, corresponding to empty bed gas residence of 75, 37.5 and 25 s, respectively, and total organic load lower than 400 g/m3.h were tested. The biofilter proved to be highly efficient in biodegradation of toluene and benzene, and toluene was more easily degraded than benzene. When each inlet load was lower than 150 g/m3.h, removal rate increased with inlet load and reached a maximum, which was 150 and 120 g/m−3.h for toluene and benzene, respectively. For inlet load higher than the maximum removal capacity conditions, the removal rate decreased with inlet load. Carbon dioxide concentration profile through the biofilter revealed that the mass ratios of carbon dioxide produced to the toluene and benzene removed were 2.15 g(CO2)/g(toluene) and 1.67 g(CO2)/g(benzene), which furthermore, confirmed the biodegradation performance in biofilter. The observation of biotic community demonstrated that the microbes consisted of bacillus, spore bacillus and fungi, of which the spore bacillus was dominant.

This content is only available as a PDF.
You do not currently have access to this content.