A coarse pore filter can be applied inside the aeration tank to facilitate the separation of sludge from liquid instead of sedimentation. This filter has pores, which are irregular in shape, and the pore size is bigger than those of MF. The objectives of the study were to maintain as much as MLSS in the activated sludge process with coarse pore filter and to investigate the performance under high MLSS condition. Small-scale reactor results so far show good quality of effluent specially after starting the sludge bulking in the system in terms of SS, TOC, DOC and turbidity. The average carbon removal for 62 days operation of this system was about 94% (based on effluent DOC) and 87% (based on effluent TOC). The average sludge yield in this system is about 0.44 kg MLSS/kg TOC which is about 0.24 kg MLSS/kg BOD. This amount is less than those of conventional activated sludge and trickling filter.
Skip Nav Destination
Research Article| December 01 2002
Performance of coarse pore filtration activated sludge system
M.R. Alavi Moghaddam;
Water Sci Technol (2002) 46 (11-12): 71–76.
M.R. Alavi Moghaddam, H. Satoh, T. Mino; Performance of coarse pore filtration activated sludge system. Water Sci Technol 1 December 2002; 46 (11-12): 71–76. doi: https://doi.org/10.2166/wst.2002.0719
Download citation file: