Various sludge concentrations and aeration rates were evaluated to find the optimal operation condition of a submerged ceramic membrane filtration system. 5.6 g/L of sludge was diluted with water to concentrations of 2.8 g/L and 1.4 g/L, and the three sludge concentrations were compared in terms of filtration characteristics such as pressure and filtrate flux. Flux was at the highest value of about 30 L/ at 50 kPa when sludge concentration was 1.4 g/L. In contrast, when sludge concentrations increased to 2.8 g/L and 5.6 g/L, the flux at 50 kPa decreased significantly to 18 L/ and 10 L/, respectively. It was concluded that the sludge concentration directly affected the filtration efficiency, and low sludge concentration was suitable for improving filtration efficiency. Adjusting the aeration rate from 2 L/min to 4 L/min at 5.6 g/L of sludge and 50 kPa of pressure increased flux from 10 L/ to 13 L/ It was obvious that the vigorous aeration improved the filtration efficiency, but the aeration rate did not seem to be high enough to maintain flux lower than critical flux.

This content is only available as a PDF.
You do not currently have access to this content.