The objective of this study was to assess the feasibility of the Sequencing Batch Reactor (SBR) system for implementation in Malaysia. Theoretical, field, laboratory investigations, and modelling simulations have been carried out. The results of the study indicated that the SBR system was robust, relatively cost-effective, and efficient under Malaysian conditions. However, the SBR system requires highly skilled operators and continuous monitoring. This paper also attempted to identify operating conditions for the SBR system, which optimise both the removal efficiencies and the removal rates. The removal efficiencies could reach 90–96% for COD, up to 92% for TN, and 95% for SS. An approach to estimate a full operational cycle time, to estimate the de-sludging rate, and to control the biomass in the sludge has also been developed. About 4 hours react time was obtained, as 2.25 hours of nitrification with aerated slow fill and 1.75 hour of denitrification with HAc addition as an additional carbon source. Inefficient settling was one of the problems that affect the SBR effluent quality. The settling time was one hour for achieving Standard B (effluent quality) and 2 hours for Standard A.
Feasibility study of sequencing batch reactor system for upgrading wastewater treatment in Malaysia
S. Al-Shididi, M. Henze, Z. Ujang; Feasibility study of sequencing batch reactor system for upgrading wastewater treatment in Malaysia. Water Sci Technol 1 December 2004; 48 (11-12): 327–335. doi: https://doi.org/10.2166/wst.2004.0872
Download citation file:
Impact Factor 1.915
CiteScore 3.3 • Q2
First Decision in 30 days