A combination of the suspended carrier biofilm process and the activated sludge process (biofilm-activated sludge - BAS) has been shown to be very successful for the treatment of different types of pulp and paper mill effluents. The robust biofilm pre-treatment in combination with activated sludge results in a stable, compact and highly efficient process. Recent findings have shown that nutrient limited operation of the biofilm process greatly improves the sludge characteristics in the following activated sludge stage, while minimising sludge production and effluent discharge of nutrients. The nutrient limited BAS process was implemented at full scale at the Södra Cell Värö kraft mill and taken into operation in July 2002. After start-up and optimisation over about 5 months, the process meets all effluent discharge limits. The removal of COD is close to 70% and the removal of EDTA greater than 90%. Typical effluent concentrations of suspended solids and nutrients during stable operations have been 20-30 mg/L TSS, 0.3-0.5 mg/L phosphorus and 3-5 mg/L nitrogen. The sludge production was 0.09 kgSS/kg COD removed and the sludge volume index was 50-100 mL/g.
Full scale implementation of the nutrient limited BAS process at Södra Cell Värö
A. Malmqvist, B. Berggren, C. Sjölin, T. Welander, L. Heuts, A. Fransén, D. Ling; Full scale implementation of the nutrient limited BAS process at Södra Cell Värö. Water Sci Technol 1 August 2004; 50 (3): 123–130. doi: https://doi.org/10.2166/wst.2004.0177
Download citation file:
Impact Factor 1.915
CiteScore 3.3 • Q2
First Decision in 30 days