Occurrence and significance of filamentous bacteria in pulp and paper activated sludge systems

A microbial survey of 27 activated sludge (AS) systems included 16 conventional activated sludge (CAS) systems, five sequential batch reactors (SBR) and six oxygen-activated sludge (OAS) systems, all treating pulp and paper effluents. The most prevalent filaments observed were Thiothrix (26%) and Type 021N (22%). The designs of the activated sludge systems seemed to have an effect on the filament types. We found Thiothrix to be the most common filament associated with bulking. For CAS systems, a completely mixed mode of operation promoted Thiothrix and Type 021N growth. Type 021N was favoured in CAS systems with food to microorganism (F/M) ratios higher than 0.2, and with dissolved oxygen (DO) residuals higher than 2 ppm, while Thiothrix generally proliferated at lower F/M ratio and DO residuals. Nutrient deficiencies as well as nutrient dosage variations were suspected in most of the systems having Thiothrix and Type 021N as the most prevalent filaments. Thiothrix appeared to prefer polyphosphate and/or ammonia rather than urea/phosphoric acid as N and P sources. Systems with aerobic selectors showed the lowest filament counts, while systems with no selectors showed the highest filament counts.