An analytical method involving solid-phase micro-extraction (SPME) and gas chromatography-mass spectrometry (GC-MS) was applied to analyze biosolids odors. A selective ion monitoring (SIM)-based MS method was developed, using SPME injections of odorant standards under the full-scan mode to select the quantification and confirmation ions for each odorant. The odorants analyzed in this study include: dimethylsulfide, dimethyldisulfide, methyl mercaptan, hydrogen sulfide, carbon disulfide, trimethylamine and dimethylamine. We have used this method to quantify parts-per-billion levels of odorant vapors produced during anaerobic incubation of digested wastewater sludge. Important considerations for expedient and accurate calibration under static and dynamic flow conditions are discussed. The SPME-GC-MS method may give a positive intercept in the calibration curve, especially under static sampling conditions, which sets a practical detection limit for odor analysis.
Skip Nav Destination
Research Article| August 01 2004
Analysis of sulfur and nitrogen odorants using solid-phase microextraction and GC-MS
Water Sci Technol (2004) 50 (4): 115–120.
M. Turkmen, S.K. Dentel, P.C. Chiu, S. Hepner; Analysis of sulfur and nitrogen odorants using solid-phase microextraction and GC-MS. Water Sci Technol 1 August 2004; 50 (4): 115–120. doi: https://doi.org/10.2166/wst.2004.0236
Download citation file: