Co-conditioning and dewatering behaviors of alum sludge and waste activated sludge were investigated. Two different sludges were mixed at various ratios (2:1; 1:1; 1:2; 1:4) for study. Capillary suction time (CST) and specific resistance to filtration (SRF) were utilized to assess sludge dewaterability. Relatively speaking, waste activated sludge, though of higher solid content, was more difficult to be dewatered than alum sludge. It was found that sludge dewaterability and settlability became better with increasing fraction of alum sludge in the mixed sludge. Dosage required of the cationic polyelectrolyte (KP-201C) for dewatering was reduced as well. It is proposed that alum sludge acts as skeleton builder in the mixed sludge, and renders the mixed sludge more incompressible which is beneficial for sludge dewatering. Implications of the results of the study to the sludge management plan for Taipei City that generates both alum sludge and waste activated sludge at significant amount are also discussed. The current sludge treatment and disposal plan in Metropolitan Taipei could be made more cost-effective.
Skip Nav Destination
Research Article| November 01 2004
Co-conditioning and dewatering of alum sludge and waste activated sludge
Water Sci Technol (2004) 50 (9): 41–48.
J.Y. Lai, J.C. Liu; Co-conditioning and dewatering of alum sludge and waste activated sludge. Water Sci Technol 1 November 2004; 50 (9): 41–48. doi: https://doi.org/10.2166/wst.2004.0530
Download citation file: