A numerical analysis technique for optimisation of microbial reaction and sludge flow has been developed in this study. The technique is based on the 3D multiphase Navier–Stokes solver with turbulence models. In order to make numerical analyses of the total processes in wastewater treatment plants possible, four numerical models, the microbial reaction model, a sludge settling model, oxygen mass transfer model from coarse bubbles, and a model from fine bubbles, are added to the solver. All parameters included in those models are calibrated in accordance with experimental results, and good agreements between calculated results and experimental results are found. Finally, this study shows that the numerical technique can be used to optimise wastewater treatment plants with an example of the operational optimisation of an intermittent agitation in anoxic reactors by coarse bubbles. With a proper appreciation of its limit and advantages, the exploitation of the CFD efficiently leads us to the right direction even though it is not quantitatively perfect.
Development and exploitation of a multipurpose CFD tool for optimisation of microbial reaction and sludge flow
T. Oda, T. Yano, Y. Niboshi; Development and exploitation of a multipurpose CFD tool for optimisation of microbial reaction and sludge flow. Water Sci Technol 1 February 2006; 53 (3): 101–110. doi: https://doi.org/10.2166/wst.2006.080
Download citation file: