A new packing for deep bed filtration using Flexible Fibers has been proposed and developed on a very large scale for tertiary treatment of wastewater. The purpose of this study is to check the possibility of using this technology for the production of drinking water from surface water. In this study, the feasibility of the fiber filter application on water treatment was examined and the removal efficiency of fiber filter was improved using an in-line coagulant injection method. The experiments were carried out at pilot scale. The filter was packed with bundles of polyamide fibers with a bed porosity of 93%. Nak-dong River was used as the filter influent water and alum, PSOM, and PAC were used as the coagulants. The coagulants were injected by the in-line injection method. Small dosages (1–5 mg/L) of the polymeric coagulants (PSOM and PAC) showed an increase of removal efficiency compared to the operation without coagulants. Specifically, 1 mg/L of PAC showed the longest filtration time. Considering filtration time, filtrate quality, and filtered volume, the filtration velocity of 120 m/hr was chosen as an optimum value. For long-term operations, the effluent quality was 0.4 NTU and the removal efficiency was stable for the given optimum conditions.
Enhancing flexible fiber filter (3FM) performance using in-line coagulation
J.-J. Lee, M.-K. Jeong, J.-H. Im, R. BenAim, S.-H. Lee, J.-E. Oh, H.-J. Woo, C.-W. Kim; Enhancing flexible fiber filter (3FM) performance using in-line coagulation. Water Sci Technol 1 April 2006; 53 (7): 59–66. doi: https://doi.org/10.2166/wst.2006.329
Download citation file: