Engineers generally use simulation tools such as SWMM, MOUSE, HYDROWORKS, etc. to simulate the operation of sewer systems. Equations used by these models to represent the hydraulics of sewer systems are well known as well as their performance. Thus assessment of the performance needs to suppose that the user is an expert who is able to describe each facility in the most accurate way according to the model. In Western Europe, important parts of sewer systems are old and combined structures. Such structures very often include very complicated special structures, especially within CSO facilities. Experience shows that the performance limits of the models do not rely on the accuracy of the equations, but on the ability of the modeller to describe these special structures properly. The objective of this research is to assess the part of errors and uncertainties which originate from modellers' inconsistencies in the description of special structures. Even if the results are obtained with specific software (CANOE), results can easily be generalised to other models, since the equations used (Barré de Saint Venant, etc.) are almost the same.
Skip Nav Destination
Research Article| September 01 2006
Assessment of uncertainties in the modelling of CSOs
*Coordinación de Tecnología Hidráulica, Instituto Mexicano de Tecnología del Agua, Paseo Cuauhnáhuac 8532, Jiutepec, Mor., 62550 México
**Unité de Recherche en Génie Civil – Hydrologie Urbaine, Institut National des Sciences Appliquées de Lyon, Bât. J. C. A. Coulomb 1ère étage, 69621, Villeurbanne, cedex, France
Search for other works by this author on:
Water Sci Technol (2006) 54 (6-7): 247–254.
J.C. García-Salas, B. Chocat; Assessment of uncertainties in the modelling of CSOs. Water Sci Technol 1 September 2006; 54 (6-7): 247–254. doi: https://doi.org/10.2166/wst.2006.602
Download citation file: