Particle size distribution (PSD) via sequential filtration/ultrafiltration was used as the tool for COD fractionation and colour profiling of textile wastewaters before and after treatment. Profiles prior to treatment suggested PSD-based COD fingerprints characteristic for the influents. Treatment efficiencies were determined via comparing the profiles of the effluents from chemical- and biological-treatment to those of the corresponding influents. COD fingerprints of the wastewaters from the textile plants, applying different treatment alternatives, were different especially at the upper size range; yet profiles after treatment were similar, with the soluble fraction (<2 nm) being almost the only apparent one. Half of the overall COD-removal via chemical treatment was at the particulate- and upper colloidal-ranges, revealing that this alternative was effective at higher ranges, but not at the soluble fraction. In contrast, biological treatment was effective at both ends of size distribution, with total removal at the particulate range and 50% elimination at the soluble portion. Overall colour content and PSD-based colour profiles of the influents were also different. Chemical treatment was successful in removing colour originating from the entire colloidal range, but was not efficient at the soluble fraction. Conversely, colour removal efficiency of biological treatment was moderate throughout the entire size spectrum.
Skip Nav Destination
Research Article| May 01 2007
Effect of chemical and biological treatment on COD fingerprints of textile wastewaters
Search for other works by this author on:
Water Sci Technol (2007) 55 (10): 277–287.
E. Dulekgurgen, S. Doğruel, D. Orhon; Effect of chemical and biological treatment on COD fingerprints of textile wastewaters. Water Sci Technol 1 May 2007; 55 (10): 277–287. doi: https://doi.org/10.2166/wst.2007.332
Download citation file: