Design of a rainwater storage tank is mostly based on the mass balance of rainwater with respect to the tank, considering aspects such as rainfall runoff, water usage and overflow. So far, however, little information is available on the quality aspects of the stored rainwater, such as the behavior of particles, the effect of retention time of the water in the tank and possible influences of system configuration on water quality in the storage tank. In this study, we showed that the performance of rainwater storage tanks could be maximized by recognizing the importance of water quality improvement by sedimentation and the importance of the system configuration within the tank, as well as the efficient collection of runoff. The efficiency of removal of the particles was increased by there being a considerable distance between the inlet and the outlet in the rainwater storage tank. Furthermore, it is recommended that the effective water depth in a rainwater tank be designed to be more than 3 m and that the rainwater be drawn from as close to the water surface as possible by using a floating suction device. An operation method that increases the retention time by stopping rainwater supply when the turbidity of rainwater runoff is high will ensure low turbidity in the rainwater collected from the tank.
Research Article|December 01 2007
Particle behaviour consideration to maximize the settling capacity of rainwater storage tanks
Water Sci Technol (2007) 56 (11): 73-79.
M.Y. Han, J.S. Mun; Particle behaviour consideration to maximize the settling capacity of rainwater storage tanks. Water Sci Technol 1 December 2007; 56 (11): 73–79. doi: https://doi.org/10.2166/wst.2007.778
Download citation file: