In activated sludge systems the mechanically treated wastewater is biologically cleaned by biomass (activated sludge). The basic requirement of an efficient biological wastewater treatment is to have as a high biomass concentration in the biological reactor (BR) as possible. The activated sludge balance in activated sludge systems is controlled by the settling, thickening, scraper mechanism in the secondary settling tank (SST) and sludge returning. These processes aim at keeping maximum sludge mass in the BR and minimum sludge mass in the SST even in peak flow events (storm water flow). It can be, however, only reached by a high SST performance. The main physical processes and boundary conditions such as inhomogeneous turbulent flow, geometrical features of the SST, wastewater treatment plant (WWTP) load, return sludge flow, sludge volume index etc. all influence settling thickening and sludge returning. In the paper a novel mass transport model of an activated sludge system is presented which involves a 2-dimensional SST model coupled with a mixed reactor model of the biological reactor. It makes possible to investigate different sludge returning strategies and their influence on the sludge balance of the investigated activated sludge system, furthermore, the processes determining the flow and concentration patterns in the SST. The paper gives an overview on the first promising model results of a prevailing peak flow event investigation at the WWTP of Graz.
Skip Nav Destination
Research Article| May 01 2008
Analysing sludge balance in activated sludge systems with a novel mass transport model
Water Sci Technol (2008) 57 (9): 1413–1419.
M. Patziger, H. Kainz, M. Hunze, J. Józsa; Analysing sludge balance in activated sludge systems with a novel mass transport model. Water Sci Technol 1 May 2008; 57 (9): 1413–1419. doi: https://doi.org/10.2166/wst.2008.221
Download citation file: