The surface of zeolite was modified by cationic β-cyclodextrin (CCD), which was synthesized with 2, 3-epoxypropyltrimethylammonium chloride (ETMAC) and β-cyclodextrin (β-CD), to prepare a novel and effective sorbent for removal of p-nitrophenol (p-NP) from aqueous solution. FTIR, SEM and EDS were used to characterize the surface modification. It was found that CCD, which was synthesized at different conditions such as the mole ratio of ETMAC against β-CD and pH, made an impact on sorption capacity of p-NP on CCD-modified zeolite (CCDMZ). Given ETMAC: β-CD = 7:1 and pH = 13, the cationic process of β-CD might be optimum for CCD to bond to zeolite surfaces. In addition, CCD concentration and modification time affected sorption capacity of p-NP on CCDMZ too. The sorption of p-NP on CCDMZ, activated zeolite (AZ) and natural zeolite (NZ) was investigated by contact time, initial p-NP concentration and sorption isotherms with the batch sorption experiments. The results showed that the sorption of p-NP on CCDMZ satisfactorily fitted the known Langmuir model and the sorption capacity of CCDMZ was higher than that of AZ and NZ although the contact time of CCDMZ appeared to be shorter than other two.
Surface modification of zeolite with β-cyclodextrin for removal of p-nitrophenol from aqueous solution
Xiaohong Li, Kun Zhu, Xuekui Hao; Surface modification of zeolite with β-cyclodextrin for removal of p-nitrophenol from aqueous solution. Water Sci Technol 1 July 2009; 60 (2): 329–337. doi: https://doi.org/10.2166/wst.2009.315
Download citation file: