The removal of mercury (Hg2 + ) ions from contaminated water using multiwalled carbon nanotubes (MWCNTs) was investigated in this study. Results of the study showed that MWCNTs slurry was very efficient in removing as high as 1.0 mg/L of Hg2 + from aqueous solutions via the adsorption mechanism. This removal efficiency was found to be a function of the aqueous pH level, dosage of CNTs, mixing rate, and contact time. The study showed that the Hg uptake by MWCNTs increased to 100% with an increase in pH from pH 4 to 8. The results also showed that higher dosage of MWCNTs, showed higher removal of Hg2 + . In a 50 mL water sample, 10 mg of MWCNTs was needed to remove all of the 0.1 mg/L of Hg2 + ions. On the other hand, increasing the mixing rate from 50 to 150 rpm improved the removal efficiency. The experimental results also showed that mercury adsorption by MWCNTs follow a pseudo second-order reaction with a rate (k) of 0.018 and it is well described by the Langmuir isotherm model with maximum adsorptive capacity (qmax) of 13.16.
Skip Nav Destination
Research Article| February 01 2010
Removal of mercury from water by multi-walled carbon nanotubes
Water Sci Technol (2010) 61 (3): 591–598.
B. Tawabini, S. Al-Khaldi, M. Atieh, M. Khaled; Removal of mercury from water by multi-walled carbon nanotubes. Water Sci Technol 1 February 2010; 61 (3): 591–598. doi: https://doi.org/10.2166/wst.2010.897
Download citation file: