Hydrotalcite (HTAL-Cl), an inorganic anion exchanger, is of use as an adsorbent for the removal of arsenate (As(V)) in water systems. The adsorption properties of HTAL-Cl for As(V) and the effects of co-existing anions on the As(V) removal performance were investigated in this work. Under the conditions of pH≥4, the adsorption capacity for As(V) gradually decreased with an increase of pH, but As(V) was removed effectively within the range of pH = 5–8. Co-existing anions interfered As(V) removal, and the effect decreased in the order of HPO42− > HCO3 > SO42− > Cl. In binary solute systems containing phosphate and As(V), the maximum adsorption capacity of HTAL-Cl was 0.95 mmol g−1 for phosphate and 0.65 mmol g−1 for As(V): the total of these values corresponded to the maximum adsorption capacity for As(V) in single solute systems. The adsorption isotherms in these binary solute systems were approximated by the following modified Langmuir equations:

As(V):   qAs=18.7√CAs/1 + 21.5√CP + 12.8√CAs,    phosphate :    qP = 33.1√CP/ 1+ 21.5√CP+  12.8√CAs

The column adsorption experiments showed that the adsorbed As(V) was released by the phosphate adsorption, because phosphate was adsorbed more strongly on HTAL-CL than As(V).

This content is only available as a PDF.
You do not currently have access to this content.