Stormwater-quality models can be useful tools for predicting pollutant loads and identifying sources of contamination. Most models in current use handle pollutants such as metals, nutrients and suspended solids, whereas models including emerging organic contaminants are rare. This study aims at developing and evaluating a model for simulating stormwater flows of two groups of organic pollutants; nonylphenols and phthalates. Sources, emission patterns and environmental fate were examined to create a model framework for the organic contaminants. The model was calibrated using field data from three urban catchments. The results show that the simulated pollutant concentrations are overestimated compared to the measured concentrations, which are often close to or below the analytical detection limit. The high uncertainty and the low predictive power of the model may be explained by factors such as incorrect catchment data, lack of knowledge on buildup, washoff and other processes involved in substance fate, and an underreporting of pollutant concentrations in stormwater. More data on release patterns and sewer fate are needed to adequately simulate stormwater concentrations of nonylphenols and phthalates. A conventional substance flow analysis based on bookkeeping, evaluated in parallel to the computer model, has proven to be useful for calculating fluxes of nonylphenols and phthalates in urban catchments.
Simulating organic pollutant flows in urban stormwater: development and evaluation of a model for nonylphenols and phthalates
K. Björklund, P. -A. Malmqvist, A. -M. Strömvall; Simulating organic pollutant flows in urban stormwater: development and evaluation of a model for nonylphenols and phthalates. Water Sci Technol 1 February 2011; 63 (3): 508–515. doi: https://doi.org/10.2166/wst.2011.251
Download citation file:
Impact Factor 1.915
CiteScore 3.3 • Q2
First Decision in 30 days