This paper describes the use of electrical conductivity for measurement of volatile fatty acids (VFA), alkalinity and bicarbonate concentrations, during the anaerobic fermentation process. Two anaerobic continuous processes were studied: the first was a laboratory reactor for hydrogen production from molasses and the second was a pilot process for anaerobic digestion (AD) of vinasses producing methane. In the hydrogen production process, the total VFA concentration, but not bicarbonate concentration, was well estimated from the on-line electrical conductivity measurements with a simple linear regression model. In the methane production process, the bicarbonate concentration and the VFA concentration were well estimated from the simultaneous on-line measurements of pH and electrical conductivity by means of non-linear regression with neural network models. Moreover, the total alkalinity concentration was well estimated from electrical conductivity measurements with a simple linear regression model. This demonstrates the use of electrical conductivity for monitoring the AD processes.

This content is only available as a PDF.
You do not currently have access to this content.