Fouling is the main bottleneck of the widespread use of MBR systems. One way to decrease and/or control fouling is by process hydrodynamics. This can be achieved by the increase of liquid cross-flow velocity. In rotational cross-flow MBR systems, this is attained by the spinning of, for example, impellers. Validation of the CFD (computational fluid dynamics) model was made against laser Doppler anemometry (LDA) tangential velocity measurements (error less than 8%) using water as a fluid. The shear stress over the membrane surface was inferred from the CFD simulations for water. However, activated sludge (AS) is a non-Newtonian liquid, for which the CFD model was modified incorporating the non-Newtonian behaviour of AS. Shear stress and area-weighted average shear stress relationships were made giving error less that 8% compared with the CFD results. An empirical relationship for the area-weighted average shear stress was developed for water and AS as a function of the angular velocity and the total suspended solids concentration. These relationships can be linked to the energy consumption of this type of systems.
Analytical and numerical modelling of Newtonian and non-Newtonian liquid in a rotational cross-flow MBR
T. R. Bentzen, N. Ratkovich, S. Madsen, J. C. Jensen, S. N. Bak, M. R. Rasmussen; Analytical and numerical modelling of Newtonian and non-Newtonian liquid in a rotational cross-flow MBR. Water Sci Technol 1 December 2012; 66 (11): 2318–2327. doi: https://doi.org/10.2166/wst.2012.443
Download citation file:
Impact Factor 1.915
CiteScore 3.3 • Q2
First Decision in 30 days