Since November 2009, Germany's first full-scale ozonation plant for tertiary treatment of secondary effluent is in continuous operation. A kinetic model was developed and combined with the commercial computational fluid dynamics (CFD) software ANSYS® CFX® to simulate the removal of micropollutants from secondary effluents. Input data like reaction rate constants and initial concentrations of bulk components of the effluent organic matter (EfOM) were derived from experimental batch tests. Additionally, well-known correlations for the mass transfer were implemented into the simulation model. The CFD model was calibrated and validated by full-scale process data and by analytical measurements for micropollutants. The results show a good consistency of simulated values and measured data. Therewith, the validated CFD model described in this study proved to be suited for the application of secondary effluent ozonation. By implementing site-specific ozone exposition and the given reactor geometry the described CFD model can be easily adopted for similar applications.
Application of CFD modelling at a full-scale ozonation plant for the removal of micropollutants from secondary effluent
M. Launer, S. Lyko, H. Fahlenkamp, P. Jagemann, P. Ehrhard; Application of CFD modelling at a full-scale ozonation plant for the removal of micropollutants from secondary effluent. Water Sci Technol 1 September 2013; 68 (6): 1336–1344. doi: https://doi.org/10.2166/wst.2013.378
Download citation file: