This paper presents the results of analyses of the chromium(III) transport process from mixtures of Cr(III)/Cr(VI) ions using supported liquid membranes (SLM), in which dinonylnaphthalene sulfonic acid (DNNSA) and di(2-ethylhexyl) phosphoric acid (D2EHPA) were used as carriers. In both cases the membrane worked as a selective barrier for Cr(VI) ions. The increase in both the time of Cr(VI) ions–carrier interaction and the Cr(VI) concentration in the feed phase negatively influenced the Cr(III) separation. The polarizing layer consisting of Cr(VI) ions prevents the access of Cr(III) ions to the inter phase surface and leads to the deactivation of the carrier, which is the result of the strong oxidation properties of Cr(VI) ions. These factors meant that, in the case of the membrane with DNNSA, the membrane could not be used for the effective separation of Cr(III) from the Cr(III)/Cr(VI) mixture. On the other hand, the membrane with D2EHPA can be used for fast and efficient transport of Cr(III) ions, but only for strictly defined process parameters, i.e. where the level of chromium(VI) concentration is below 10−3M and with intensive feed phase mixing.

This content is only available as a PDF.
You do not currently have access to this content.