Activated carbons (ACs) from six coals, ranging from low-rank lignite brown coal to high-rank stone coal, were utilized as adsorbents to remove basic methylene blue (MB) from an aqueous solution. The surface properties of the obtained ACs were characterized via thermal analysis, N2 isothermal sorption, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and Boehm titration. As coal rank decreased, an increase in the heterogeneity of the pore structures and abundance of oxygen-containing functional groups increased MB coverage on its surface. The equilibrium data ﬁtted well with the Langmuir model, and adsorption capacity of MB ranged from 51.8 to 344.8 mg g−1. Good correlation coefficients were obtained using the intra-particle diffusion model, indicating that the adsorption of MB onto ACs is diffusion controlled. The values of the effective diffusion coefficient ranged from 0.61 × 10−10 to 7.1 × 10−10 m2 s−1, indicating that ACs from lower-rank coals have higher effective diffusivities. Among all the ACs obtained from selected coals, the AC from low-rank lignite brown coal was the most effective in removing MB from an aqueous solution.
Adsorption isotherms and kinetics of activated carbons produced from coals of different ranks
B. Purevsuren, Chin-Jung Lin, Y. Davaajav, A. Ariunaa, S. Batbileg, B. Avid, S. Jargalmaa, Yu Huang, Sofia Ya-Hsuan Liou; Adsorption isotherms and kinetics of activated carbons produced from coals of different ranks. Water Sci Technol 1 April 2015; 71 (8): 1189–1195. doi: https://doi.org/10.2166/wst.2015.094
Download citation file: