The textile industry is known for the high use of chemicals, such as dyes, and large volumes of effluent that contaminate waters, a fact that has encouraged research and improved treatment techniques. In this study, we used unprocessed soybean hulls for the removal of reactive blue BF-5G dye. The point of zero charge of soybean hulls was 6.76. Regarding the speed of agitation in the adsorption process, the resistance to mass transfer that occurs in the boundary layer was eliminated at 100 rpm. Kinetics showed an experimental amount of dye adsorbed at equilibrium of 57.473 mg g−1 obtained under the following conditions: dye initial concentration = 400 mg L−1; diameter of particle = 0.725 mm; dosage = 6 g L−1; pH 2; 100 rpm; temperature = 30 °C; and duration of 24 hours. The pseudo-second order best showed the dye removal kinetics. The adsorption isotherms performed at different temperatures (20, 30, 40 and 50 °C) showed little variation in the concentration range assessed, being properly adjusted by the Langmuir isotherm model. The maximum capacity of dye adsorption was 72.427 mg g−1 at 30 °C. Since soybean hull is a low-cost industrial byproduct, it proved to be a potential adsorbent for the removal of the textile dye assessed.
Adsorption of reactive blue BF-5G dye by soybean hulls: kinetics, equilibrium and influencing factors
Jacqueline Ferandin Honorio, Márcia Teresinha Veit, Gilberto da Cunha Gonçalves, Élvio Antonio de Campos, Márcia Regina Fagundes-Klen; Adsorption of reactive blue BF-5G dye by soybean hulls: kinetics, equilibrium and influencing factors. Water Sci Technol 4 March 2016; 73 (5): 1166–1174. doi: https://doi.org/10.2166/wst.2015.589
Download citation file:
Impact Factor 1.638
CiteScore 3.3 • Q2
First Decision in 30 days