The aim of this article was to clarify which type of dye chromophores could be decolorized efficiently with the use of laccase enzyme. For this purpose, enzymatic degradation of different type of dye classes (4 reactive, 2 acid and 1 basic dye) having various chromophore groups was investigated by using commercial laccase from Cerrena unicolor. It was observed that the chromophore structure of dye is very important on enzymatic color removal efficiency. According to the experimental results, it was found that color removal efficiencies (20 mg/L initial dye) were 98.7% for RB220 (0.1 g/L enzyme after 6 h), 95.1% for RB19 (0.1 g/L enzyme after 48 h), 90.8% for AR42 (0.1 g/L enzyme after 48 h) while they were 60.9% for AR114 (0.25 g/L enzyme), 58.6% for RB21 (0.5 g/L enzyme), 39.7% for RR239 (0.25 g/L enzyme) even after seven days. As a result, it can be said that the highest decolorization rate was achieved for the reactive dye having formazan copper complex (RB220) chromophore. On the other hand, the enzymatic degradation of basic dye (BB9) was found to be rather difficult compared to the acid and reactive dyes used in this study and the maximum color removal was 42.8% after seven days.