A 3-year study was conducted using an aerobic upflow sludge blanket (AUSB) reactor to achieve high-rate biological treatment through maintenance of a high biomass concentration (7–10 g VSS/L) together with a high oxygen flux. The AUSB reactor was not aerated directly; instead, oxygenation was provided in an external chamber with flow recirculation. The oxygenation was provided at four different ressurizations: 0, 15, 20 and 25 psig. The AUSB reactor was also pressurized to avoid the flotation of biomass. The flow recirculation rate was varied from 400% to 1,500% in order to ensure adequate oxygen supply. It was found that the AUSB system was able to handle a volumetric loading of as high as 10 kg COD/m3-day with a removal efficiency of 92%. Despite a high upflow velocity through AUSB, the effluent suspended solid concentration was mostly below 60 mg/L. The active fraction of biomass in the AUSB sludge was about 3 times higher than that of the regular activated sludge. This was indicated by a very high specific oxygen uptake rate (SOUR), up to 180-250 mg O2/g VSS-hr. The sludge yield in the entire system was only 0.09 to 0.13 g VSS/g COD removed. This was mainly caused by additional auto-oxidation of biosolids in the oxygenation chamber due to flow recirculation.

This content is only available as a PDF.