With the increasing demand for high quality water, a large quantity of chemical agent must be added in the water purification process, which in turn generates enormous amount of fresh water sludge. Of all the options for sludge disposal, sludge reuse has been considered most economical and environmentally sound. This study evaluated the possibility of incorporating fresh water sludge in the making of Portland cement through the sintering process. The goal was to search for the optimal condition to maximize the replacement of clay with the fresh water sludge. Characteristics of fresh water sludge were collected and analyzed. The analysis showed that water source and water treatment process dominate the characteristics, particularly the chemical composition of the fresh water sludge. The fresh water sludge was mixed with the cement clay in various percentages, from 0% to 100%, as raw material for cement-making. The effects of its addition on the sintering condition and the quality of cement were evaluated. The analysis of the clinkers showed that the addition of the fresh water sludge did not change the phase form and the f-CaO content of the cement. The compressive strength of the masonry increased with the increasing addition of fresh water sludge. All cement products made from various replacement ratios met the Chinese National Standard of first degree Portland cement.
Research Article| November 01 2004
Reuse of fresh water sludge in cement making
Water Sci Technol (2004) 50 (9): 183-188.
J.R. Pan, C. Huang, S. Lin; Reuse of fresh water sludge in cement making. Water Sci Technol 1 November 2004; 50 (9): 183–188. doi: https://doi.org/10.2166/wst.2004.0566
Download citation file: