Characteristics of solids recovered from stormwater best management practice (BMP) facilities, including stormwater ponds, constructed wetlands, an infiltration basin, a biofilter, a stormwater treatment clarifier, and three-chamber oil and grit separators were described with respect to their metal chemistry. The reported trace metal concentrations in BMP sediments were assessed against the Ontario Sediment Quality Guidelines. Between 80 to 100% of all samples were marginally-to-intermediately polluted by Cd, Cr, Cu, Fe, Pb, Mn, Ni and Zn. Severe pollution of sediments was noted for Cr (122 μg/g), Cu (151 and 196 μg/g), Mn (1,259 and 1,433 μg/g), and Zn (1,116 μg/g), at several facilities studied, and even higher levels of metals were reported in the literature for certain oil and grit separators. With respect to individual BMPs, the severe pollution was found in sediments from oil and grit separators (for Cd, Cr, Cu, Pb and Zn), the stormwater clarifier sludge (Cu, Mn and Zn), a biofilter (Cu and Mn), an industrial area stormwater pond (Cu only), and a commercial/residential pond (Cr only). Finally, the chemical pollution of pond sediment triggered toxicity testing at some of the facilities studied, and sediment toxicity was confirmed at several sites.
Skip Nav Destination
Research Article| January 01 2006
Trace metal levels in sediments deposited in urban stormwater management facilities
Water Sci Technol (2006) 53 (2): 175–183.
J. Marsalek, W.E. Watt, B.C. Anderson; Trace metal levels in sediments deposited in urban stormwater management facilities. Water Sci Technol 1 January 2006; 53 (2): 175–183. doi: https://doi.org/10.2166/wst.2006.051
Download citation file: