During a six-year period the Austrian Benchmarking System was developed. The main objectives of this benchmarking system are the development of process indicators, identification of best performance and determination of cost reduction potentials. Since 2004 this system is operated via an internet platform and automated to a large extent. Every year twenty to thirty treatment plants use the web-based access to this benchmarking platform. The benchmarking procedure comprises data acquisition, data evaluation including reporting and organised exchange of experience for the treatment plant managers. The process benchmarking method links the real costs with four defined main processes and two support processes. For wastewater treatment plants with a design capacity >100,000 PE these processes are further split up into sub-processes. For each (sub-) process the operating costs are attributed to six cost elements. The specific total yearly costs and the yearly operating costs of all (sub-)processes are related to the measured mean yearly pollution load of the plant expressed in population equivalents (PE110: 110 gCOD/d corresponding to 60 g BOD5/d)). The specific capital costs are related to the design capacity (PE). The paper shows the benchmarking results of 6 Austrian plants with a design capacity >100,000 PE representing approximately 30% of the Austrian municipal wastewater treatment plant capacity.
Skip Nav Destination
Research Article| May 01 2008
Benchmarking of large municipal wastewater treatment plants treating over 100,000 PE in Austria
S. Lindtner ;
H. Schaar ;
Water Sci Technol (2008) 57 (10): 1487–1493.
S. Lindtner, H. Schaar, H. Kroiss; Benchmarking of large municipal wastewater treatment plants treating over 100,000 PE in Austria. Water Sci Technol 1 May 2008; 57 (10): 1487–1493. doi: https://doi.org/10.2166/wst.2008.214
Download citation file: