In this paper a CFD model is presented that allows for an approximation of the flow field within MBR-tanks. The technique is demonstrated by means of two examples considering both hollow-fibre and sheet-membrane modules. The flow field is computed and a comparison between measured and computed flow velocities shows the good quality of the numerical model.
Research Article| April 01 2008
Flow structures in MBR-tanks
Water Sci Technol (2008) 57 (5): 699-705.
J. Saalbach, M. Hunze; Flow structures in MBR-tanks. Water Sci Technol 1 April 2008; 57 (5): 699–705. doi: https://doi.org/10.2166/wst.2008.122
Download citation file: