Evaluation of model parameters for simulating TiO2 coated UV reactors | Water Science & Technology | IWA Publishing

Skip to Main Content

Evaluation of model parameters for simulating TiO₂ coated UV reactors

Water Sci Technol (2011) 63 (7): 1366–1372.

This article has been cited by the following articles in journals that are participating in CrossRef Cited-by Linking.

Modeling the anodization of large titanium electrodes

Esperanza Mena
Miguel López
María José Martín de Vidales
Javier Marugán

Chemical Engineering Science (2018) 186: 74.

Detailed modeling of oxalic acid degradation by UV-TiO 2 nanoparticles: Importance of light scattering and photoreactor scale-up

Domenico Santoro
Ferdinando Crapulli
Andrea Turolla
Manuela Antonelli

Water Research (2017) 121: 361.

Design and CFD modelling of the anodic chamber of a continuous PhotoFuelCell reactor for water treatment

Yi Wen Phuan
Harun Mohamed Ismail
Sergi Garcia-Segura
Meng Nan Chong

Process Safety and Environmental Protection (2017) 111: 449.

Experimental Evaluation of Turbidity Impact on the Fluence Rate Distribution in a UV Reactor Using a Microfluorescent Silica Detector

Mengkai Li
Wentao Li
Dong Wen
Zhimin Qiang
Ernest R. Blatchley

Environmental Science & Technology (2017) 51 (22): 13241.

Carbamazepine degradation using a N-doped TiO 2 coated photocatalytic membrane reactor: Influence of physical parameters

Inna Horovitz
Dror Avisar
Mark A. Baker
Rossana Grilli
Luca Lozzi
Daniela Di Camillo
Hadas Mamane

Journal of Hazardous Materials (2016) 310: 98.